Deck Mounted Sensor Tap by Delabie
Part No: DPSTAPD2
WRAS approved deck mounted sensor tap which saves water & provides complete hygiene with no manual contact.
Battery operated with integrated 123 6V Lithium batteries
Reduced stagnation solenoid valve and electronic unit integrated into the body of the tap
Flow rate pre-set at 3Ipm at 3 bar, can be adjusted from 1.5-6 Ipm
Scale resistant flow straightener
Duty flush (60 seconds every 24 hours after last use)
Active, infrared presence detection, sensor at the end of the spout optimises detection
Chrome plated solid body 130mm long
Cap fixed in place by 2 concealed screws
Stopcock
Fixing reinforced by 2 stainless steel rods
Anti-blocking security
Cut-out required is 35mm dia.
Flow rate pre-set at 3Ipm at 3 bar, can be adjusted from 1.5-6 Ipm
Scale resistant flow straightener
Duty flush (60 seconds every 24 hours after last use)
Active, infrared presence detection, sensor at the end of the spout optimises detection
Chrome plated solid body 130mm long
Cap fixed in place by 2 concealed screws
Stopcock
Fixing reinforced by 2 stainless steel rods
Anti-blocking security
Cut-out required is 35mm dia.
